Here we are probably doing D.I.Y. In our pool management system, each entry on this site is written to support and encourage the pool owner to do it himself. Here we do everything ourselves. in the pool management system, every article on this site is written to support and encourage the pool owner to do it himself.
Disinfect with chlorine water “Bleach”
Using bleach for exfoliation is like one of our most obvious DIY cleaning tips, but it is also good to remove stains and stains: Carefully pour one gallon of 5.25% unscented bleach into your pool (10,000 gallons) until it reaches 3 percent each. million.
.
2. Increase pH with Baking Soda (Sodium Bicarbonate)
One of the cheapest ways to clean your pool is to make baking soda. You can mix it with water to clean the tiles, grout, concrete or stone. It can also increase the alkalinity and pH levels in your pool by adding 1.5 pounds per 10,000 gallons of pool water to increase the pH by 10 parts per million.
3. Low pH with Hydrochloric Acid
Hydrochloric acid can meet the needs of your lake care as an acid cleaner for concrete and shot, but it can also reduce the alkalinity of water by up to 10 ppm depending on the concentration and size of the lake. Be sure to wear gloves and shoes, goggles, and leather resistant clothing.
4. Remove Metal Stains with Vitamin C
Our DIY Pool Cleaning Tips also includes some products that will look amazing at first glance! However, crushed vitamin C tablets are good for removing stains and rust from the walls of your pool and equipment because they are ascorbic acid.
5. Use Citric acid or wine to remove Scaling
The lime deposits on the walls of the lake (or limescale) cause high pH levels or calcium hardness in the lake water. You can use a 1: 1 solution of vinegar and water to wipe the stain with a sponge, or citric acid on the brush for extra stiffness.
